Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2015-08-27 00:26:11

hkplus
Contributor
Registered: 2015-01-07
Posts: 127

Using AT5577 to emulate EM410X tag, Honeywell format

Just curious, how does the proxmark calculate the Honeywell DEZ 10 and DEZ 5.5 numbers from the EM tag data?  I have a tag that when I use the ProxMark on it with LF Search, the DEZ 10 and DEZ 5.5 numbers match what is printed on the tag.  If I wanted to make a new tag, how could I configure the registers on the EM5577 to emulate? 

Thanks!

hkplus

Offline

#2 2015-08-27 16:25:39

hkplus
Contributor
Registered: 2015-01-07
Posts: 127

Re: Using AT5577 to emulate EM410X tag, Honeywell format

Got it figured out, thanks anyway.

Offline

#3 2015-08-29 19:54:19

kayser88
Contributor
Registered: 2015-08-12
Posts: 23

Re: Using AT5577 to emulate EM410X tag, Honeywell format

Use this command "lf em4x em410xwatch "
Result with UID tag.

"lf em4x em410xwrite" +  ( uid ) and number  0 or 1 depand type card

Offline

Board footer

Powered by FluxBB