Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2015-09-18 23:34:08

kayser88
Contributor
Registered: 2015-08-12
Posts: 23

Help for use simulator

Hi everybody ,

I don't understand i try but no good result for sim a tag.

i use the command :

proxmark3> hf mf nested 1 0 A 8829da9daf76 t
Testing known keys. Sector count=16
nested...
Time in nested: 4.016 (inf sec per key)

-----------------------------------------------
Iterations count: 0


|---|----------------|---|----------------|---|
|sec|key A           |res|key B           |res|
|---|----------------|---|----------------|---|
|000|  8829da9daf76  | 1 |  8829da9daf76  | 1 |
|001|  8829da9daf76  | 1 |  8829da9daf76  | 1 |
|002|  8829da9daf76  | 1 |  8829da9daf76  | 1 |
|003|  8829da9daf76  | 1 |  8829da9daf76  | 1 |
|004|  8829da9daf76  | 1 |  8829da9daf76  | 1 |
|005|  8829da9daf76  | 1 |  8829da9daf76  | 1 |
|006|  8829da9daf76  | 1 |  8829da9daf76  | 1 |
|007|  8829da9daf76  | 1 |  8829da9daf76  | 1 |
|008|  8829da9daf76  | 1 |  8829da9daf76  | 1 |
|009|  8829da9daf76  | 1 |  8829da9daf76  | 1 |
|010|  8829da9daf76  | 1 |  8829da9daf76  | 1 |
|011|  8829da9daf76  | 1 |  8829da9daf76  | 1 |
|012|  8829da9daf76  | 1 |  8829da9daf76  | 1 |
|013|  8829da9daf76  | 1 |  8829da9daf76  | 1 |
|014|  8829da9daf76  | 1 |  8829da9daf76  | 1 |
|015|  8829da9daf76  | 1 |  8829da9daf76  | 1 |

normaly is tranfer into emulator memory ok ,

proxmark3> hf mf ecfill A 1
--params: numSectors: 16, keyType:0#db# EMUL FILL SECTORS FINISHED

ok i check the emulator

proxmark3> hf mf eget 0

data[  0]:a0 ca 44 d7 f9 88 04 00 c2 05 00 00 00 00 00 13

Its correct same information of my original tag 

after i try "hf mf sim" i put the antenna front of my reader and nothing ... the led of my proxmark is orange  when my antenna is near of my reader but nothing ...

I start with proxmark not sure of my process.

Thanks for your answer

Offline

Board footer

Powered by FluxBB