Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2015-12-21 20:58:47
- pmk33
- Member
- Registered: 2015-12-21
- Posts: 3
Raw data of snoop command (HF)
I want to get the raw data of the snoop command in order to make a plot with the information. I wonder if there is a command that allow me to get it.
I am using a Pegoda reader and Mifare Classic tags.
I am not sure is "Hexsamples" command could help me
Thanks
Offline
#2 2015-12-21 21:14:47
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Raw data of snoop command (HF)
data plot - show the plot window
data samples - to download data in bigbuff on device.
Offline
#3 2015-12-21 21:34:28
- pmk33
- Member
- Registered: 2015-12-21
- Posts: 3
Re: Raw data of snoop command (HF)
Thanks, But "data samples" give me the raw data of the snoop command? I am usign an HF tag and I not sure if that information corresponds with the one I need. Also I want to get a file with the raw data information how can I achieve that? Because when I use the command "data samples" this happens
proxmark3> data samples 20
Reading 20 bytes from device memory
Data fetched
Samples @ 8 bits/smpl, decimation 1:1
But where can I save that information?
Offline
#4 2015-12-21 21:49:04
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Raw data of snoop command (HF)
If you look at the data commands and the answer will be clear.
Btw you would read 20000-40000 bytes from a raw signal
Offline
Pages: 1