Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2016-04-12 10:11:00
- luca.soldi
- Member
- Registered: 2016-04-12
- Posts: 2
Proxmark3 boot problem
Hi all!
I've a problem with my proxmark3, when I was doing an "hf tune" the board becoming to be unresponsive. The next time I connect it to usb of my pc, the board after flashing the leds ahead the button, they turn off and the red led at the right of the button flash 1 time.
What is the problem? How could I solve it?
Thanks in advance!
Luca
Offline
#2 2016-05-30 09:00:35
- luca.soldi
- Member
- Registered: 2016-04-12
- Posts: 2
Re: Proxmark3 boot problem
Nobody? 
Offline
#3 2016-05-30 10:29:17
- ntk
- Contributor
- Registered: 2015-05-24
- Posts: 701
Re: Proxmark3 boot problem
pls see here.
http://www.proxmark.org/forum/viewforum.php?id=22
Offline
#4 2016-06-09 16:54:03
- Nafylendr
- Member
- From: ??????
- Registered: 2016-06-06
- Posts: 2
Re: Proxmark3 boot problem
Hi,
my IBM-Thinkpad R40 with 733 mhz seems to be defect.
When i press the on-button he doesnt boot anymore right. i only can see the start-boot-page with the thinkpad logo and the F1-........
somone know this problem?
thank u very much and sorry for my bad english
Offline
#5 2016-06-12 18:22:11
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: Proxmark3 boot problem
@nafylendr, I think you are posting in the wrong forum. This forum is about the Proxmark3 device and RFID.
Offline
Pages: 1