Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
I have a question about the cracking the Classic 4k card.
I am running the mifare_autopwn.lua script, then trying to clone to a writeable 4k card (from clonemykey)
This process worked with a 1k hotel card and a 1k UID changeable card from rysc, however when issuing the "hf mf cload emlhere" command, i get this error:
proxmark3> hf mf cload xxxxxxxx
#db# wupC1 error
Can't set magic card block: 0
I can use the "wrbl" command and write the entire first block manually to the same card I am trying to clone, but I can't clone the entire card with the same method as the 1k card.
EDIT: realized the 4k cards from clonemykey are not chinese magic cards, therefore cload wouldn't work.
If i write a script to write to the card block by block with the eml dump, (telling the script which key to use for each block written) would this work?
Last edited by blitzkrieg (2016-08-17 18:17:47)
Offline
Bump plz anyone.
Offline
Pages: 1