Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2016-09-19 17:51:43
- rookieatall
- Contributor
- Registered: 2016-07-31
- Posts: 25
unable detect proxmark3
Um, I follow the instructions of iceman fork, but I cant flash it or use client.
when I type dmesg I do find
522.856346] usb 2-2.2: new full-speed USB device number 5 using uhci_hcd
[ 523.121258] usb 2-2.2: New USB device found, idVendor=2d2d, idProduct=504d
[ 523.121261] usb 2-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[ 523.121263] usb 2-2.2: Manufacturer: proxmark.org
[ 523.196616] cdc_acm 2-2.2:1.0: ttyACM0: USB ACM device
[ 523.197890] usbcore: registered new interface driver cdc_acm
[ 523.197891] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 541.657180] usb 2-2.2: USB disconnect, device number 5
[ 548.445726] usb 2-2.2: new full-speed USB device number 6 using uhci_hcd
[ 548.711813] usb 2-2.2: New USB device found, idVendor=2d2d, idProduct=504d
[ 548.711817] usb 2-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[ 548.711818] usb 2-2.2: Manufacturer: proxmark.org
[ 548.715133] cdc_acm 2-2.2:1.0: ttyACM0: USB ACM device
when I try to flash it keep waiting proxmark3 to appear on port
and when i run client it indicates invalid port.
anyone can help me ?
By the way, I complie it on Ubutun Linux 64-bit version is 15.10 .
Offline
#2 2016-09-19 19:11:24
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: unable detect proxmark3
Strange, which command do you use to flash?
are you using a virtual enviroment?
Offline
#3 2016-09-19 19:46:26
- hexa3e8
- Contributor
- From: EARTH
- Registered: 2016-06-27
- Posts: 81
Re: unable detect proxmark3
I also use ubuntu and run the following commands. (just 5 minutes ago, for me this method works)
go to your proxmark directory
client/flasher /dev/ttyACM0 -b bootrom/obj/bootrom.elf
client/flasher /dev/ttyACM0 armsrc/obj/fullimage.elfplug in your proxmark while keeping the button pressed all the time. meanwhile press enter in your terminal to execute the first command. do it all over for the second command. It takes just a few seconds. I hope this works for you.
Offline
Pages: 1