Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2016-09-09 01:29:18
- ericlam2728
- Contributor
- Registered: 2015-09-26
- Posts: 34
- Website
Mifare plus cloning cards
I'm wondering what type of cards/chips I need to write to for the newer mifare cards. I can't seem to find the newer cards which support the new Prng anywhere
Offline
#2 2016-09-09 06:13:49
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: Mifare plus cloning cards
Im guessing you need a magic s50 tag with 7bytes uid.
Offline
#3 2016-10-06 21:18:21
- ericlam2728
- Contributor
- Registered: 2015-09-26
- Posts: 34
- Website
Re: Mifare plus cloning cards
so when I do a hf search and it says nxp mifare classic 4k | plus 4k sli I will need a s50?
and if it says nxp mifare classic 2k| plus 2k sli i can use a s50 as well?
Offline
#4 2016-10-06 21:22:24
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: Mifare plus cloning cards
if it says 4k, you will need a s70 (4k) magic tag..
if it says 2k, I have no idea which kind of tag you need. A magic s50 can set SAK/ATQA to mimic a 2k card but only have 1k memory. So thats what I would test first if it works.
Offline
Pages: 1