Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
I downloaded the "ProxMark Driver-2012-01-15" from https://code.google.com/archive/p/proxmark3/downloads since the "ProxSpace-Driver-Current.7z" is not available on the link. When I follow the steps to install the drivers, I get an error of Windows was unable to install your unknown device. I tried all the necessary steps but can not be able to install the drivers.
I am using the PROXMARK III Getting started Guide for Windows 7 users version 1. The OS I am using is: Windows 7 Enterprise Service Pack 1 64 bit. The Proxmark under Device Manager is not shown under Human Interface Device but appears under Other device as Unknown device. When I select update driver software and select browse for driver software on computer, then select the folder where I extracted the "ProxMark Driver-2012-01-15" it brings up the error Windows was unable to install your unknown device.
Is there something I am doing wrong? Or can someone share a getting started manual to use when first using the PM3.
and in addition I tried the method on the post of Gjgrant (http://www.proxmark.org/forum/viewtopic.php?id=2674) titled: Trouble with Driver and still get the same error. I disabled the driver signature verification and also tried using the .7zip file and still get the same error.
Please help!!!
Offline
not sure of your specific problem but you might want to have a look at https://github.com/Proxmark/proxmark3/wiki
Offline
Sorry double
Last edited by ntk (2016-12-20 01:47:52)
Offline
window 7 64 bit let you only intall signed driver. You need to google for
- signed unsigned driver win7
- howto intall unigned driver in win7.
- tool to run win7 test mode.
Also in device manager you switch on "Show hidden device" particuliarly in PORTS, USB anything appears but i not physically connected, you delete it. Then you can try to intall your PM3 driver again (must be already in test mode )
Offline