Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2017-01-12 03:40:34
- yaowang
- Contributor
- Registered: 2017-01-11
- Posts: 15
Can't dump data
proxmark3> hw version
[[[ Cached information ]]]
Prox/RFID mark3 RFID instrument
uC: AT91SAM7S256 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 256K bytes. Used: 0 bytes ( 0%). Free: 262144 bytes (100%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
proxmark3> hf mf nested 1 0 B ffffffffffff d
Testing known keys. Sector count=16
nested...
Time in nested: 4.302 (inf sec per key)
-----------------------------------------------
Iterations count: 0
|---|----------------|---|----------------|---|
|sec|key A |res|key B |res|
|---|----------------|---|----------------|---|
|000| ffffffffffff | 1 | ffffffffffff | 1 |
|001| ffffffffffff | 1 | ffffffffffff | 1 |
|002| ffffffffffff | 1 | ffffffffffff | 1 |
|003| ffffffffffff | 1 | ffffffffffff | 1 |
|004| ffffffffffff | 1 | ffffffffffff | 1 |
|005| ffffffffffff | 1 | ffffffffffff | 1 |
|006| ffffffffffff | 1 | ffffffffffff | 1 |
|007| ffffffffffff | 1 | ffffffffffff | 1 |
|008| ffffffffffff | 1 | ffffffffffff | 1 |
|009| ffffffffffff | 1 | ffffffffffff | 1 |
|010| ffffffffffff | 1 | ffffffffffff | 1 |
|011| ffffffffffff | 1 | ffffffffffff | 1 |
|012| ffffffffffff | 1 | ffffffffffff | 1 |
|013| ffffffffffff | 1 | ffffffffffff | 1 |
|014| ffffffffffff | 1 | ffffffffffff | 1 |
|015| ffffffffffff | 1 | ffffffffffff | 1 |
|---|----------------|---|----------------|---|
Printing keys to binary file dumpkeys.bin...
proxmark3> hf mf dump 1
|-----------------------------------------|
|------ Reading sector access bits...-----|
|-----------------------------------------|
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ BLOCK FINISHED
Could not get access rights for sector 0. Trying with defaults...
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ BLOCK FINISHED
Could not get access rights for sector 1. Trying with defaults...
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ BLOCK FINISHED
Could not get access rights for sector 2. Trying with defaults...
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ BLOCK FINISHED
Could not get access rights for sector 3. Trying with defaults...
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ BLOCK FINISHED
Could not get access rights for sector 4. Trying with defaults...
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ BLOCK FINISHED
Could not get access rights for sector 5. Trying with defaults...
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ BLOCK FINISHED
Could not get access rights for sector 6. Trying with defaults...
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ BLOCK FINISHED
Could not get access rights for sector 7. Trying with defaults...
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ BLOCK FINISHED
Could not get access rights for sector 8. Trying with defaults...
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ BLOCK FINISHED
Could not get access rights for sector 9. Trying with defaults...
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ BLOCK FINISHED
Could not get access rights for sector 10. Trying with defaults...
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ BLOCK FINISHED
Could not get access rights for sector 11. Trying with defaults...
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ BLOCK FINISHED
Could not get access rights for sector 12. Trying with defaults...
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ BLOCK FINISHED
Could not get access rights for sector 13. Trying with defaults...
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ BLOCK FINISHED
Could not get access rights for sector 14. Trying with defaults...
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ BLOCK FINISHED
Could not get access rights for sector 15. Trying with defaults...
|-----------------------------------------|
|----- Dumping all blocks to file... -----|
|-----------------------------------------|
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ BLOCK FINISHED
Could not read block 0 of sector 0
It seens already dump the keys,but why I can't dump the data??
Offline
#2 2017-01-12 04:45:43
- yaowang
- Contributor
- Registered: 2017-01-11
- Posts: 15
Re: Can't dump data
I use hw tune，but
proxmark3> hf mf rdsc 0 A FFFFFFFFFFFF
--sector no:0 key type:A key:ff ff ff ff ff ff
#db# Authentication failed. Card timeout.
#db# Auth error
#db# READ SECTOR FINISHED
isOk:00
It doesn't work,even held it a small distance from the reader.
Offline
#3 2017-01-12 07:29:04
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Can't dump data
Your firmware output look strange, 100% free memory?
Offline
#4 2017-01-12 08:17:17
- yaowang
- Contributor
- Registered: 2017-01-11
- Posts: 15
Re: Can't dump data
It look strange,but it works
I dump 2 card already
but this card, I don't know what's wrong
Offline
#5 2017-01-12 08:42:18
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Can't dump data
how is your antenna? basic troubleshooting on pm3 for HF commands it to have distance and different positions over antenna.
Offline
#6 2017-01-12 09:54:40
- yaowang
- Contributor
- Registered: 2017-01-11
- Posts: 15
Re: Can't dump data
Like this?
http://www.proxmark.org/forum/viewtopic.php?id=4271
Held card away about 1~1.5cm from antenna? It don't work either....
Offline
#7 2017-01-12 10:25:57
- yaowang
- Contributor
- Registered: 2017-01-11
- Posts: 15
Re: Can't dump data
proxmark3> hf 14a reader
ATQA : 00 04
UID : cb 62 ed 03
SAK : 08 [2]
TYPE : NXP MIFARE CLASSIC 1k | Plus 2k SL1
proprietary non iso14443-4 card found, RATS not supported
Answers to chinese magic backdoor commands: NO
Offline
#8 2017-01-12 15:58:17
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Can't dump data
Have you resetted the hardcoded SAK? if so, this looks like a good read. You should be able to run "hf mf mifare" etc on it now
Offline
#9 2017-01-16 17:32:59
- pk926
- Contributor
- Registered: 2017-01-08
- Posts: 19
Re: Can't dump data
Your problem can be on the access bits... I had the same problem.
Offline
Pages: 1