Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2017-01-12 23:27:35
- ltq1990
- Contributor
- Registered: 2017-01-12
- Posts: 25
Anyone familiar with this kind of keyfob? PM3 can detect it at all
Hi guys I got this fob from my friend, looks like it's LF tag, however I tried SEARCH LF, EM410xwatch, both failed to detected this tag, I also tried INVESTIGATE LF, all I found is noice， no actual wave signal.
Please share some opinions. Thanks in advance!
See the image here: http://www.sydneyunlocking.com.au/presco.png
Offline
#2 2017-01-13 04:15:31
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: Anyone familiar with this kind of keyfob? PM3 can detect it at all
presco was discussed on this topic.http://www.proxmark.org/forum/viewtopic.php?id=2795
if you are using the latest github code it should not be difficult to read the tag.
Offline
#3 2017-01-13 04:16:51
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: Anyone familiar with this kind of keyfob? PM3 can detect it at all
careful using the windows gui, it is not maintained. i suggest you give the command line a try.
Offline
#4 2017-01-13 06:32:40
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: Anyone familiar with this kind of keyfob? PM3 can detect it at all
One of these days someone should update the xml file for it. Knowing the command client makes it easy for you to switch between different client versions.
Offline
#5 2017-01-13 09:14:59
- ltq1990
- Contributor
- Registered: 2017-01-12
- Posts: 25
Re: Anyone familiar with this kind of keyfob? PM3 can detect it at all
presco was discussed on this topic.http://www.proxmark.org/forum/viewtopic.php?id=2795
if you are using the latest github code it should not be difficult to read the tag.
I tried to update to 2.5.0 but failed, I followed the instruction but suddenly a windows pop up shows "the program can't start because libusb0.dll is missing from your computer".
Offline
#6 2017-01-13 13:37:58
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: Anyone familiar with this kind of keyfob? PM3 can detect it at all
you are trying the precompiled distro by Asper. Its old.
Try @gator96100 's newer environment, http://www.proxmark.org/forum/viewtopic … 534#p25534
or try my docker container,
or run a linuxdistro (in a virtual box?)
Offline
#7 2017-01-14 14:16:25
- ltq1990
- Contributor
- Registered: 2017-01-12
- Posts: 25
Re: Anyone familiar with this kind of keyfob? PM3 can detect it at all
you are trying the precompiled distro by Asper. Its old.
Try @gator96100 's newer environment, http://www.proxmark.org/forum/viewtopic … 534#p25534
or try my docker container,
or run a linuxdistro (in a virtual box?)
Thx, I just got my PM3 for 1 week and I have zero knowledge of using github and I had a hard time finding a clear instruction to update firmware, but I will try my best to figure it out.
Offline
#8 2017-01-14 20:48:08
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: Anyone familiar with this kind of keyfob? PM3 can detect it at all
Read the wiki, and some sticky threads here, and some readme.files from repo, and you should have a better picture
Offline