Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
I am getting confused as to which cards can emulate other cards. Is there a complete list somewhere?
Example..
T55x7 can emulate:
HID tags.
...
...
...
but not emulate
...
...
EM4305 can emulate:
...
...
...
but not emulate
HID tags.
...
My aim is to be able to clone cards, so knowing which cards can emulate which cards would be useful.
Offline
unfortunately that may take a lifetime to compile. there are thousands of card types and formats, even within one brand.
Offline
Maybe @OP can make one?
Offline
Maybe @OP can make one?
Would love to if I had the knowledge. I just started with proxmark.
Perhaps fire up a wiki page and we can all contribute
Side question, if I had to choose between ordering T55x7 or EM4305 cards for cloning, which one in general would be more useful? Or cover a wider variety of tags it can emulate?
I did some testing today I was able to emulate a HID prox card using a T5577 but not on a EM4305? I was using lf hid clone.
Does the EM4305 need a step before it can emulate a HID prox? Or just another command?
Thinking of writing up docs and instructions including flow charts for my own reference, and posting them somewhere once I have the basics down
Offline
Marshmellow mentioned to me that HID Prox uses in earlier tag t55x7 chipsets and in newer EM4305 chipsets.
As of right now, the EM4305 is not supported in PM3. well, not more than defaultreadmode. Maybe it will be supported later on.
Just read your post in other topic, I guess I will stick to T55x7?
Offline
The t55x7s are easier to understand and work with.
All the pm3 cloning was designed for the t55x7 or t5555 (q5)
Offline