Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2017-03-25 11:06:05
- bryann
- Contributor
- Registered: 2017-03-24
- Posts: 2
I Can't clone my RFID Card
Hi,
I here because I need your help. This is my problem:
I want copy my RFID card but i can't. When I do "mf chk *1 ? d" I have this message:
"Found keys have been dumped to file dumpkeys.bin. 0xffffffffffff has been inserted for unknown keys "
And I'm a little loose
Can you help me? because before I worked with OSx now I use Kali. And before It's work normally.
For information I follow this tutorial http://bouzdeck.com/rfid/32-cloning-a-mifare-classic-1k-tag.html
Thank's for your help
Offline
#2 2017-03-25 12:16:49
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: I Can't clone my RFID Card
I believe that system has detection for magic generat 1a tags.
If you can sniff the traffic between reader/card with yr proxmark3 and post the trace here it would be great.
on PM3 master you can use these commands:
hf 14a snoop
hf mf sniff
Offline
Pages: 1