Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2017-03-29 15:44:05
- 12point
- Contributor
- Registered: 2017-03-15
- Posts: 2
iclass keyfob clone error
Hello guys and experts I tried clone the iclass card .. using via iclassified which I download from https://github.com/ColdHeat/iclass
I was running WinXP by VMware...
im using omnikey 5321 V2 CLi reader.. everything is OK for running (driver OK omnikey is reading iclass key, I just followed step by step) and also I wrote command on MinGW
$iclass.exe read
However, it said
Error: Authentication Failed
what is the problem and how can I fixit or how can I clone iclass??
please help me...
thanks.
Offline
#2 2017-03-29 16:41:51
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: iclass keyfob clone error
You do know that you are posting in a dedicated Proxmark3 forum? For questions about the software I suggest you start an issue on its Github page.
Offline
Pages: 1