Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
I have opportunity to purchase some of these following readers:
- Omnikey 5321 V2
- Omnikey 5325
- Omnikey 3121
- GemPlus PC410-SL
- GemPlus PC430
- TWN3 Multi 125
- TWN3 HID iClass RS232
Do you know these?
Are they any good for our RFID research?
Would you buy any of them now-a-days?
Thanks for your advise
Last edited by ntk (2017-05-05 04:37:43)
Offline
Nevery used Gem... so can't comment on those.
What model is the 'HID OK'? 5427?
The Omnikey 5321 is an oldie but a goodie.
Offline
I have found a remark from K.V Chung
xmarks
("In order to read and write to cards, you will, at the minimum, need a reader/writer. The simplest way to get one is to get a reader/writer from the HID OMNIKEY line. Either the HID OMNIKEY 5321 or 6321 will work. The model number does not matter very much, contrary to what you may think. I used an HID OMNIKEY 6321 CLi and an HID OMNIKEY 5321 v2 CLi." and
"... According to the iClass developer's documentation, it should not be possible to perform this without knowing the master key. Nonetheless, in a true testament to the insecurity of the HID iClass system, simple modifications to the iclassified example code allow a user to read and write to an iClass card without the master key. " -KV Chung.-)
Not sure about HID OK, I contacted the person. liek to hear what he says about model ... could be 3121 .
GEMPLUS kit have been used for creating GSM to UMTS 3G Mobile test SIM cards ... In any way a research field related to uor Promark3 program?
Last edited by ntk (2017-05-05 12:36:51)
Offline