Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
After moving from
bootrom: /-suspect 2015-11-04 22:15:34
os: /-suspect 2015-11-04 22:15:41
to
bootrom: /-suspect 2015-11-04 22:15:34
os: iceman/master/v1.1.0-2055-g4d189095 2017-06-27
My pm3 has stopped working, even if the client acknowledges it the instructions do nothing
Of course I've tried reflashing it with all the possible images and there is no way
The question could be: Do I already ask the pirate bus or not?
Best regards
Last edited by xugmu (2017-07-11 01:00:55)
Offline
while this question has been answered many many times now, you need to hold the button and flash the corresponding bootrom to the code you flashed your arm from. (you might need to check the com port as it may change.)
Offline
Thank you very much Marshmellow
Promak has returned to normal
I promise to read more next time
Best regards
Last edited by xugmu (2017-07-17 21:07:06)
Offline