Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2017-11-14 04:29:35

goseoan
Contributor
Registered: 2017-11-06
Posts: 11

Is mifare classic and mifare plus security level 1 the same?

Hi there

Suddenly, I have a question and write.

mifare classic is nested, darkside is possible.

mifare plus security level 1 allows nested, darkside?

I did the practice of identifying, cracking and modifying the mifare plus sl 1 card with nfclib,

then

mifare plus security level3 reads log, balance etc ....

I checked that the course does not have aes 128 certifications?

Is not nested and darkside possible?

Additionally,

Is there a way to downgrade the mifare plus card's sl level, which can only be adjusted upwards on the datasheet?

I am, of course, a student studying security measures.

Offline

#2 2017-11-14 16:06:54

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: Is mifare classic and mifare plus security level 1 the same?

  • hf mf nested and hf mf mifare are based on flaws in Crypto1 and the broken PRNG of Mifare Classic. The PRNG has been fixed in Mifare Classic EV1 and Mifare Plus.

  • hf mf hardnested is based on Crypto1 flaws alone and even works with "good" PRNGs. Requires one known key though.

  • Mifare Plus in SL1 behaves like a Mifare Classic EV1 with the option of an additional AES authentication.

  • Mifare Plus in SL2 requires the additional AES authentication and SL3 doesn't use Crypto1 authentication at all. None of the known attacks on Crypto1 are therefore applicable.

  • yes, you can only increase Mifare Plus Security Levels. There is no way back

Offline

Board footer

Powered by FluxBB