Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hi...
I want to use PM3 like a tag,
so I run prox-gui.bat, I type a command 'hi14asim 56535653'.
PM3 hardware lights up.
PM3 fakes ISO 14443a tag with UID 56535653.
But a card reader can't read this tag.
The result of card reader is like below...
1 =>21 : REQA command
2 <=004403
3 =>2300 : Anticollision command
4 <=08(08 : SERIAL_NUMBER ERROR)
I want to know the reason....
Help me.....
Offline
Pages: 1