Proxmark3 community

gennaio

Contributor

Registered: 2018-02-26

Posts: 2

What to flash on Elechouse proxmark v3 easy from linux?

Hello,
i just got a Elechouse Proxmark3 v3

#db# Prox/RFID mark3 RFID instrument          
#db# bootrom: /-suspect 2015-04-02 15:12:04          
#db# os: /-suspect 2015-04-02 15:12:11          
#db# HF FPGA image built on 2015/03/09 at 08:41:42          
Prox/RFID mark3 RFID instrument          
          
uC: AT91SAM7S256 Rev B          
Embedded Processor: ARM7TDMI          
Nonvolatile Program Memory Size: 256K bytes. Used: 0 bytes ( 0%). Free: 262144 bytes (100%).          
Second Nonvolatile Program Memory Size: None          
Internal SRAM Size: 64K bytes          
Architecture Identifier: AT91SAM7Sxx Series          
Nonvolatile Program Memory Type: Embedded Flash Memory         

I tried to read in the forum and in various tutorials how to get started. As far as i understand i should update the firmare since it is outdate and specific version of the client works with specific versions of the client, in fact trying the latest client some commands work and some other don't. Can i update it using an official firmware or should i search for something specifically for Elechouse model? Will i be able to update using the latest client or should i look for another one?

Sorry for the repost from introduction

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: What to flash on Elechouse proxmark v3 easy from linux?

you should update to the latest offical pm3 firmware compiled with latest source code from GitHub.