Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2017-12-18 14:44:01
- sdr_herrmanns
- Contributor
- Registered: 2017-11-11
- Posts: 28
cant write magic desfire with csetuid 8 hex symbols limit
hello,
is there any firmware which is able to write the 7 byte with csetuid for "magic" desfire cards?
(or have i overseen something in current firmware which is able to write on 7 bytes uids?)
cheers
Offline
#2 2017-12-19 12:53:05
- Dot.Com
- Contributor
- From: Hong Kong
- Registered: 2016-10-05
- Posts: 180
- Website
Re: cant write magic desfire with csetuid 8 hex symbols limit
If you bought it from me, I will be more than happy to pass you the magic command to change it.
Send me your order number or email to my email at info@rfxsecure.com.
Thanks.
Offline
#3 2018-01-04 11:08:44
- sdr_herrmanns
- Contributor
- Registered: 2017-11-11
- Posts: 28
Re: cant write magic desfire with csetuid 8 hex symbols limit
got it thanks!
Offline
#4 2018-02-27 13:30:41
- Heru
- Contributor
- Registered: 2017-10-08
- Posts: 78
Re: cant write magic desfire with csetuid 8 hex symbols limit
hey sdr_herrmanns
How did you access the content of your original card? care to elaborate a bit more
Offline