Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Hello all,
A small new problem came to my attention when I tried to upgrade the firware.
I am under linux and I used :
./flasher /dev/ttyACM0 ../armsrc/obj/fullimage.elf
Loading ELF file '../armsrc/obj/fullimage.elf'...
Loading usable ELF segments:
0: V 0x00102000 P 0x00102000 (0x0002ccd8->0x0002ccd8) [R X] @0x94
1: V 0x00200000 P 0x0012ecd8 (0x00001930->0x00001930) [RW ] @0x2cd6c
Note: Extending previous segment from 0x2ccd8 to 0x2e608 bytes
Waiting for Proxmark to appear on /dev/ttyACM0. Found.
Entering bootloader...
(Press and release the button only to abort)
Waiting for Proxmark to reappear on /dev/ttyACM0....... Found.
Flashing...
Writing segments for file: ../armsrc/obj/fullimage.elf
0x00102000..0x00130607 [0x2e608 / 372 blocks].....................................................After that the proxmark kept stuck, nothing is happening anymore and my leds A and C are lit (not flashing just lit)
And by looking in the usb I see the proxmark but when I go to the port it say invalid port.
So basically cannot access my proxmakr anymore
Is there anything I can do ?
Thank you in advance
Last edited by T. (2018-05-13 15:13:29)
Offline
Hi T.
Iam facing the exact same issue. Stuck at the flashing step just like you.
I just tried to run the flash again, and Iam now stock in the previous step "Waiting for Proxmark to appear on /dev/ttyACM0. Found." just before entering the bootloader.
I followed all the github step and unfortunately, it didnt sucess...
https://github.com/Proxmark/proxmark3/wiki/Kali-Linux
Offline
I just tried again but this time under windows 7. I was able to flash the device without pb. it is working now.
Offline
Depending on the age of the previous firmware it may be necessary to flash the bootrom as well.
Offline