Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
How to clone HID proximty keyfob to new HID proximity Keyfob?
Hi, I just got several brandnew HID proximuty Keyfobs from my uncle.Is it possible to change the new HID proximity keyfob card number and make it a clone of an old HID proximity keyfob?
i dont want to clone to T5577, but i wan to clone to original new HID proximity keyfob so they both work and look identical.
anyone can help? I am grateful....
Offline
This would require identifying the chip inside (the easy part)
And obtaining the chips password set by hid (the harder part)
But It is possible yes.
Offline
This would require identifying the chip inside (the easy part)
And obtaining the chips password set by hid (the harder part)But It is possible yes.
thanks for guidance. i how to get the password set by hid?
is it by lf hid brute or something else?
Offline
If you have 1 to 2 years you could try the brute force method.
If you have an official hid programmer and some credits for programming you could program a tag with that. (And snoop the transmission)
Offline