Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2009-01-15 14:56:04
- rule
- Member
- Registered: 2008-05-21
- Posts: 417
Hardware debugging, if booting hangs on RED light, what does this mean
Hey all,
Recently I got some new proxmarks. These have only one problem. When I flash them (through JTAG or USB) everything seems fine. But when the proxmark startsup to the second level it seems to stuck at the red-light.
From what I know this means it stops hangs while trying to flash the FPGA. Is there a easy way to (hardware) debug this? What could there possible wrong here? I know a lot about the software, but when it comes to hardware I'm quite a noob 
Well I hope anyone can help me out here.
Thanks in advance,
Roel
Offline
#2 2009-01-16 09:59:14
- rule
- Member
- Registered: 2008-05-21
- Posts: 417
Re: Hardware debugging, if booting hangs on RED light, what does this mean
Thank you for you quick response and information. I will look into this and let you know what comes out.
Cheers, Roel
Offline