Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hi everyone
I have problem converting a RFID code into another format.
An entity has key cards that have one code registered to the cards.
They have the code classified as DIRECTNUMBER.
An example:
The key cards RFID code in their system: 12003A8000
The machine I need to use these cards on register's this as:
Card decimal number: 0973083258
Card hexa number: 3A00127A
Anyone has an idea which format is the code in their system (12003A8000) and how to convert it to the decimal number/hexa number that my machine is registering?
By using Mifare RFID reader, I was able to get an output of 12003A by setting an output format of 13 no. in D. But still, I am unable to get the 8000 after the code.
Any ideas?
Thank you in advance!
Offline
Pages: 1