Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
I have "successfully" implemented an ISO-15693. Using the PM3 with a TI- TRF7960 Reader/writer I can respond to an Inventory command and read block command and a Write-with-Password command. This work\s with a single and double subcarrier request.
My problem is that the system does not work with the third party ready I am trying to attach. when I snoop the reader with an actual Tag present i get
25010092E5 *** Inventory One slot - dual subcarrier
41200055B9 *** Read Block 00 - dual subcarrier - option flag
412001DCA8 *** Read Block 01 - dual subcarrier - option flag
412002479A *** Read Block 03 - dual subcarrier - option flag
412003CE8B *** Read Block 03 - dual subcarrier - option flag
61A50792722B6028C507E03C0B9E8B03000000004708 *** Write with Pwd block 03 - dual subcarrier - address - opt
412003CE8B *** Read block 03 check if write was successful
When I replace the Tag with the PM3 all I get is the inventory Command - 25010092E5. So I guess the reader is not getting the response from the PM3. Yet the PM3 tag simulator can successfully respond to all these commands using the TI- TRF7960 Reader/writer.
Can anyone explain why the the Tag Simulator would work with the TI system and not the unknown reader?
I can provide the code to anyone who is interested.
Offline
Hey,
Can you attach the code as a patch to the issue list?
This way, others could help debugging this problem you have. It would be useful if you could (passively) monitor with a second proxmark what communication went on between the reader and your emulated tag.
cheers,
roel
Offline
Pages: 1