Proxmark3 community

minivan

Contributor

Registered: 2018-08-30

Posts: 6

Hey!

Just bought a proxmark3 RDV. 4 and have already been playing around cloning, reading, etc.  Everything is compiled, up, and running.  Few questions, what is the latest firmware/bootrom version numbers?  I know there is Iceman's fork and I have tried that but then reverted back to the main Proxmark GitHub due to a "success" on bruteforcing a t55x7 card (Only problem it randomly picked a number even when no card was there).  Now I'm having similar issues with the main fork.  Good news, I am a programmer at heart and know a bit of LUA so I'm excited to see what I can do with this beast.  Below is the output of 'hw version'.

Prox/RFID mark3 RFID instrument
bootrom: master/v3.0.1-397-gd62f7ba-dirty-suspect 2018-08-29 19:39:52
os: master/v3.0.1-397-gd62f7ba-dirty-suspect 2018-08-29 19:39:56
fpga_lf.bit built for 2s30vq100 on 2015/03/06 at 07:38:04
fpga_hf.bit built for 2s30vq100 on 2018/08/13 at 21:22:51
uC: AT91SAM7S512 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 512K bytes. Used: 193654 bytes (37%). Free: 330634 bytes (63%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory

I know when I initially started it, it had Iceman's name in it.  Where can I obtain the most updated firmware?  Thank You!

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: Hey!

Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.