Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
I have some question about the command "hf mf hard r" I have uesed the command "hf mf hard 0 a ffffffffffff 4 a w" to start a buter force and I got a file "hf-mf-7055E109-nonces.bin" because something wrong i have to stop the program when the next time i wanna start it again I tried "hf mf hard r ffffffffffff" but it did not start as I respect.
Proxmark3 RFID instrument
[ CLIENT ]
client: iceman build for RDV40 with flashmem; smartcard;
[ ARM ]
bootrom: iceman/master/ice_v3.1.0-994-g08306779 2018-08-07 12:09:57
os: iceman/master/ice_v3.1.0-994-g08306779 2018-08-07 12:10:01
[ FPGA ]
LF image built for 2s30vq100 on 2017/10/25 at 19:50:50
HF image built for 2s30vq100 on 2018/ 7/28 at 18:36:55
[ Hardware ]
--= uC: AT91SAM7S512 Rev B
--= Embedded Processor: ARM7TDMI
--= Nonvolatile Program Memory Size: 512K bytes, Used: 237459 bytes (45%) Free: 286829 bytes (55%)
--= Second Nonvolatile Program Memory Size: None
--= Internal SRAM Size: 64K bytes
--= Architecture Identifier: AT91SAM7Sxx Series
--= Nonvolatile Program Memory Type: Embedded Flash Memory(hardware infoumation is jist like thie)
Hrer are the reply from proxmark
pm3 --> hf mf hard r ffffffffffff
hf mf hard r ffffffffffff
--target block no: 0, target key type:A, known target key: 0xffffffffffff, file action: read, Slow: No, Tests: 0
Couldn't read benchmark data. Assuming brute force rate of 120000000 states per second
time | #nonces | Activity | expected to brute force
| | | #states | time
------------------------------------------------------------------------------------------------------
0 | 0 | Start using 8 threads and AVX2 SIMD core | |
0 | 0 | Brute force benchmark: 120 million (2^26.8) keys/s | 140737488355328 | 14d
0 | 0 | Using 0 precalculated bitflip state tables | 140737488355328 | 14d
2 | 0 | Reading nonces from file hf-mf-7055E109-nonces.bin... | 140737488355328 | 14d
2 | 2240 | Read 2240 nonces from file. cuid=7055e109 | 140737488355328 | 14d
2 | 2240 | (1. guess: Sum(a8) = 0) | nan | nand
6 | 2240 | Apply Sum(a8) and all bytes bitflip properties | nan | nand
What has happened to this? Hope you could help me thanks very much
Offline
Please try official client and firmware.
Offline
I tried your way and these are what i got.
this is the vertion of the official os.
Prox/RFID mark3 RFID instrument
bootrom: master/v3.0.1-401-g53edb04-suspect 2018-09-10 23:40:35
os: master/v3.0.1-401-g53edb04-suspect 2018-09-10 23:40:38
fpga_lf.bit built for 2s30vq100 on 2015/03/06 at 07:38:04
fpga_hf.bit built for 2s30vq100 on 2018/ 9/ 3 at 21:36:22
uC: AT91SAM7S512 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 512K bytes. Used: 192736 bytes (37%). Free: 331552 bytes (63%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
and i ran "hf mf hardnested 0 A FFFFFFFFFFFF 4 A w" and it gave me such a reply"24 | 2156 | Starting brute force... | 114283110400 | 16min"
then i tried this one"hf mf hard r ffffffffffff"
and the reply longs the same as the iceman,,, any other reason could cause this ? hope you could reply.
proxmark3> hf mf hard r ffffffffffff
hf mf hard r ffffffffffff
--target block no: 0, target key type:A, known target key: 0xffffffffffff, file action: read, Slow: No, Tests: 0
Using AVX2 SIMD core.
Couldn't read benchmark data. Assuming brute force rate of 120000000 states per second
time | #nonces | Activity | expected to brute force
| | | #states | time
------------------------------------------------------------------------------------------------------
0 | 0 | Start using 8 threads and AVX2 SIMD core | |
0 | 0 | Brute force benchmark: 120 million (2^26.8) keys/s | 140737488355328 | 14d
0 | 0 | Using 0 precalculated bitflip state tables | 140737488355328 | 14d
2 | 0 | Reading nonces from file nonces.bin... | 140737488355328 | 14d
2 | 2240 | (1. guess: Sum(a8) = 0) | nan | nand
7 | 2240 | Apply Sum(a8) and all bytes bitflip properties | nan | nand
32 | 2240 | Brute force phase: 25.00% | nan | nand
32 | 2240 | (2. guess: Sum(a8) = 32) | nan | nand
32 | 2240 | (Estimated Sum(a8) is WRONG! Correct Sum(a8) = 256) | nan | nand
37 | 2240 | Apply Sum(a8) and all bytes bitflip properties | nan | nand
37 | 2240 | Starting brute force... | nan | nand
50 | 2240 | Brute force phase: 11.75% | nan | nand
57 | 2240 | Brute force phase: 62.32% | nan | nand
58 | 2240 | (3. guess: Sum(a8) = 56) | nan | nand
59 | 2240 | Apply Sum(a8) and all bytes bitflip properties | nan | nand
59 | 2240 | Starting brute force... | nan | nand
61 | 2240 | (4. guess: Sum(a8) = 64) | nan | nand
61 | 2240 | (Estimated Sum(a8) is WRONG! Correct Sum(a8) = 256) | nan | nand
67 | 2240 | Apply Sum(a8) and all bytes bitflip properties | nan | nand
163 | 2240 | Brute force phase: 12.25% | nan | nand
174 | 2240 | Brute force phase: 61.99% | nan | nand
179 | 2240 | (5. guess: Sum(a8) = 80) | nan | nand
181 | 2240 | Apply Sum(a8) and all bytes bitflip properties | nan | nand
198 | 2240 | Brute force phase: 12.32% | nan | nand
199 | 2240 | (6. guess: Sum(a8) = 96) | nan | nand
213 | 2240 | Apply Sum(a8) and all bytes bitflip properties | nan | nand
213 | 2240 | (Test: Key NOT found) | 0 | 0s
Offline
Please try official client and firmware.
Offline
Using 0 precalculated bitflip state tables
Where are your bitflip files?
Offline
Using 0 precalculated bitflip state tables
Where are your bitflip files?
so that's the problem right? I didn't make any change about rhat....
Offline
The hardnested directory must be in the same location as the proxmark3 executable. Maybe you moved some files around?
Offline
The hardnested directory must be in the same location as the proxmark3 executable. Maybe you moved some files around?
I download the firmware from google netdisk made by Asper and the hardnested directory is put into the same folder with proxmark3.exe.And I put nocens.bin file with proxmark3.exe too.Is there any other May cause this situation?If not may be i can only try my best to finish hardnested from beginning to end.
Offline