Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2018-10-13 10:18:36
- mike
- Member
- Registered: 2018-10-11
- Posts: 22
proxmark3 elechouse
Hi,when i do hf tune then I see sending bytes to proxmark failed. And when I whant to flash the proxmark3 again then i see #db# button press detected but no stored taged to play. (ignoring button).also when I whant to read i see failed to proxmark can. Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.I read that many times but still stuck that's why I ask if somebody can help .
Offline
#2 2018-10-13 10:20:34
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: proxmark3 elechouse
...this is the introduction section.. your access has been updated, so you can now post your question in relevant section.
Offline
Pages: 1
Topic closed