Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2018-10-29 20:18:06
- EgonSommer
- Contributor
- Registered: 2018-10-29
- Posts: 1
new & already a problem
I have today unpacked the new Proxmark 3 RDV4 and wanted to install the current firmware. Unfortunately, it seems like something went wrong with the firmware update. I installed everything on my Kali Linux and started the update process via the "update script" from the repository (https://github.com/RfidResearchGroup/proxmark3).
After that I only saw the following in the shell.
~/proxmark3# ./update.sh
Waiting for Proxmark to appear...
Found proxmark on /dev/pm3-0
Loading ELF file bootrom/obj/bootrom.elf
Loading usable ELF segments:
0: V 0x00100000 P 0x00100000 (0x00000200->0x00000200) [R X] @0x94
1: V 0x00200000 P 0x00100200 (0x00000d48->0x00000d48) [R X] @0x298
Loading ELF file armsrc/obj/fullimage.elf
Loading usable ELF segments:
0: V 0x00102000 P 0x00102000 (0x00037528->0x00037528) [R X] @0x94
1: V 0x00200000 P 0x00139528 (0x000012d4->0x000012d4) [RW ] @0x375bc
Note: Extending previous segment from 0x37528 to 0x387fc bytes
[+] Waiting for Proxmark to appear on /dev/pm3-0
[=] UART Setting serial baudrate 460800
.Found
Entering bootloader...
(Press and release the button only to abort)
[+] Waiting for Proxmark to appear on /dev/pm3-0
......................[=] UART Setting serial baudrate 460800
. Found
Flashing...
Writing segments for file: bootrom/obj/bootrom.elf
0x00100000..0x001001ff [0x200 / 1 blocks].OK
0x00100200..0x00100f47 [0xd48 / 7 blocks].......OK
Writing segments for file: armsrc/obj/fullimage.elf
0x00102000..0x0013a7fb [0x387fc / 452 blocks].....................................................Waiting for a response from the proxmark...
You can cancel this operation by pressing the pm3 button
After that the Proxmark does not boot anymore. What else can I do ?
Thanks in advance!
Offline
#2 2018-10-30 05:07:24
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: new & already a problem
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.
This is the introduction, no place for questions.
but Kali users has troubles, most likely the modemanager spooking.. https://github.com/RfidResearchGroup/pr … /issues/35
Offline
Pages: 1
Topic closed