Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2019-01-20 00:38:00
- HyperVectra
- Contributor
- From: Sydney
- Registered: 2019-01-19
- Posts: 9
- Website
Proxmark/Proxbrute Indala/T55XX read/clone/bruteforce
If my questions are painful, I am sorry. I am somewhat new to RFID..
Firstly, Specs:
Reader:
Prox/RFID mark3 RFID instrument w/ LF Antenna
bootrom: master/v3.1.0-51-gd3c6065-suspect 2019-01-19 19:14:40
os: master/v3.1.0-51-gd3c6065-suspect 2019-01-19 19:14:50
fpga_lf.bit built for 2s30vq100 on 2015/03/06 at 07:38:04
fpga_hf.bit built for 2s30vq100 on 2018/11/28 at 08:33:11
Running Proxbrute minor Lemon 3.1.0(ish)
PC:
x86 Win 10
So, I have an Indala 125Mhz card which I want to use as a base to bruteforce a reader. It won't read unless I specifically use 'ls indala read'. but I have managed to clone it on to a T55xx card.
I downloaded proxbrute and flashed it, but I can't figure out how to read the indala card and start cycling through. I cant find any kind of guide besides basically a '--help' printout. I am also finding it quite buggy & with cut down abilities. There looks like there are some good scripts installed but I dont know which one does what as the filenames aren't exactly clear.
Is there any guide that gives a list of all the cards/frequencies/their compatability with each other/whether the tech has been rooted & maybe even a simple way to identify which square plastic card/keyfob uses what tech?
</rant>
Anyway, any help would be appreciated.
Offline