Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2019-02-27 10:41:26
- shefajs
- Contributor
- Registered: 2019-02-27
- Posts: 3
RFID fiddler
Hi,
I hate OEM limitations and consumables protecting. So I got PM3 a few years ago to fight with Mifare cards. Now the ICODE-SLI(X,S).
If I get advice or help in the field I don't know much - I happily offer help in the field I know best - Professional 3D printing, service and hacking of the large machines (3D systems, Solidscape, Envisiontec, Prodways, Stratasys).
And a HW repair (BGA soldering, advanced HW diagnostic, Controller repair...etc.)
Petr
Offline
#2 2019-03-01 05:20:29
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: RFID fiddler
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.
Your access rights has been updated.
Offline
Pages: 1
Topic closed