Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
HI:
I have a problem with proxmark.I flash new osimage and fpgaimage that I modify original
version. But,after flash my proxmark can not work.I try use the SAM7S Flash Programmer software with "2008.09.17-armpgm-ebuller-proxmark3-image.S19" to reflash my proxmak.And now,I use the "hi14asnoop" command that is show "unknow command".So, I flash osimage and fpgaimage that is release on proxmark site.But now, the proxmark light the all LEDs, yellow LED, green LED and red LED repeated. Does anyone has been to meet the problem? Please tell me what happen with my proxmark, or give me some recommend. Thank you very much.
Offline
The 'unknown command' is typically a miss-match between the bootloader and the osimage/fpgaimage.
--
Fixer
Offline
To Fixer :
Thank you for your answer. I will try with your propose.
Offline
Pages: 1