Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Hey guys, im writing a function to emulate a number of different tags. For user convenience, it seems to be a requirement to be able to leave the antenna within the field of the reader. to facilitate this requirement i figured it would be the best to disable the antenna and re-enable it between sending the tags. this way the user can just keep the antenna in the readers' field and emulate all of the different tags without having to physically remove the tag(antenna) from the field between transmission.
does anyone know of a simple way to do this? i cant seem to find a function for it.
Offline
Have you tried setting the FPGA to off?
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);Also, you may want to try stopping the antenna with this:
LOW(GPIO_SSC_DOUT);If using the latter method, be sure the code contains the following beforehand:
AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;[Offline