Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2019-08-08 16:42:59
- db69
- Contributor
- Registered: 2019-05-21
- Posts: 6
Identifying RFID Reader Protocol
Hi There,
Has anyone a suggestion as how to identify the type of card an RFID access system expects ?
I have no access to any related card and would like to try to bruteforce the system. Not knowing what the reader expects, I don't know what to send. However, from the look of the cards, I expect them to be LF.
Available hardware : Proxmark RDV4.0, BlueShark, ChameleonMini
Any ideas welcome.
Enjoy.
Offline
#2 2019-08-12 19:42:10
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Identifying RFID Reader Protocol
If you have an unknown card, start looking at the voltage drop with yr pm3.
If you have an unknown reader, start using hw detect reader stuff..
Offline
Pages: 1