Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2019-08-19 22:32:09
- l07tb0y
- Contributor
- Registered: 2019-08-12
- Posts: 9
Two questions about ProxMark3
So I am still reading through some stuff but thought I ask you guys first
1. If I am in standalone mode and I record a TAG. If I turn off the device (I have the battery and bluetooth module) does the memory get wiped? and if it does not get wiped how can I get to the memory banks to simulate cards?
2. I am at a Resort that rhymes with Shamisney and I scanned their room tag it come up as the following
[fpc] pm3 --> hf search
[=] Checking for known tags...
UID : 36 0F A0 4D
ATQA : 00 04
SAK : 08 [2]
TYPE : NXP MIFARE CLASSIC 1k | Plus 2k SL1 | 1k Ev1
[=] proprietary non iso14443-4 card found, RATS not supported
[=] Answers to magic commands: NO
[+] Prng detection: HARD
[+] Valid ISO14443-A tag found
can I record this card and play back?
Offline
#2 2019-08-20 16:22:29
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Two questions about ProxMark3
Only two standalone modes takes advantage of the new external flash memory to persist during power off. HF_COLIN/HF_BOG both HF.
Since you don't say which standalone mode you are using, I can only assume you use lf_samyrun. which only uses ram.
so many guides/blogs/videos/forumposts on hardnested, start searching.
Offline
Pages: 1