Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2011-03-29 08:43:52
- gregy
- Member
- Registered: 2011-03-20
- Posts: 7
Writing to proxmark flash
Hello again,
could you please tell me if it is possible to use proxmark flash memory as permanent storage from firmware? I would like to store some values while in standalone mode and download them to the pc later (even after proxmark reboot).
Thank you.
EDIT: I found this: http://www.proxmark.org/forum/topic/266 … -to-flash/ . But it seems to deal with modifying flash from pc.
Last edited by gregy (2011-03-29 10:49:03)
Offline
#2 2012-03-26 08:47:04
- tlou
- Member
- Registered: 2012-02-13
- Posts: 7
Re: Writing to proxmark flash
I'm aware that this post is one year old, but I'm wondering the same. Is it possible to write to the flash (basically just an ID) to be able to later retrieve it from the client? If yes, how? I'm also wondering the same for the other direction, writing to flash from the pc client to be able to use that data with the proxmark in standalone mode. Everything is for research purposes 
Thanks.
-Tiina
Offline