Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2019-10-16 20:27:34
- XT4T1C
- Contributor
- Registered: 2019-10-12
- Posts: 19
PM3 not detected after second use
Hi,
I'm new here and this question has probably been asked more often but I can't find an awnser to my exact question soo here we go:
I bought the PM3 and followed every exact step in the manual. Evrything seemed to work af first. I used the proxmark for the purpose I needed it for and put it away again.
After a few days I wanted to start using it again, but not it's not getting detected anymore. Not if I hold the button, and neither in my device manager. So no COM ports are gettings assigned anymore.
Anyone got tips?
Offline
#2 2019-10-16 20:28:40
- XT4T1C
- Contributor
- Registered: 2019-10-12
- Posts: 19
Re: PM3 not detected after second use
I'm using windows 10 by the way
Offline
#3 2019-11-02 18:04:58
- XT4T1C
- Contributor
- Registered: 2019-10-12
- Posts: 19
Re: PM3 not detected after second use
Can't imagine no one knows.. -.-
Offline
#4 2019-11-03 04:28:20
- mwalker
- Moderator
- Registered: 2019-05-11
- Posts: 318
Re: PM3 not detected after second use
To recap.
- Setup and working
- Next usage, no com port when pm3 is connected
- Windows 10
Is there any indication that windows is searching for the driver for the device when first connected ?
Any unknown devices appear in device manager when connected ?
Offline
#5 2019-11-03 09:53:13
- XT4T1C
- Contributor
- Registered: 2019-10-12
- Posts: 19
Re: PM3 not detected after second use
Correct.
Absolutely nothing seems to happen in my PC when I connect it; although the PM3 is actually getting switched on (against the odds), according to the LED on it.
Offline
#6 2019-11-03 09:54:37
- XT4T1C
- Contributor
- Registered: 2019-10-12
- Posts: 19
Re: PM3 not detected after second use
So to be clear; no unknown devices detected either.
Offline
#7 2019-11-03 11:26:29
- anybody
- Contributor
- Registered: 2016-12-20
- Posts: 36
Re: PM3 not detected after second use
Is the cable the same?
Offline
#8 2019-11-03 11:30:42
- XT4T1C
- Contributor
- Registered: 2019-10-12
- Posts: 19
Re: PM3 not detected after second use
Yes, I use the one that came with the package. I was thinking to try another cable or another PC but haven't tried that yet
Offline
#9 2019-11-03 16:15:51
- XT4T1C
- Contributor
- Registered: 2019-10-12
- Posts: 19
Re: PM3 not detected after second use
OK, as I suspected; a different cable gives the same effect.. I haven't got another PC on hand, So I'll post my findings if I get my hands on one. Meanwhile I'd still like to solve this problem with my current setup.
Offline
#10 2019-11-03 21:34:30
- mwalker
- Moderator
- Registered: 2019-05-11
- Posts: 318
Re: PM3 not detected after second use
What model pm3 do you have?
Some have 2 usb connectors but only 1 is for comms. Like the easy.
Offline
#11 2019-11-03 21:38:41
- XT4T1C
- Contributor
- Registered: 2019-10-12
- Posts: 19
Re: PM3 not detected after second use
I think it's the newest model, it only has one connector. How do I know what model it is?
Offline
#12 2019-11-03 23:47:19
- mwalker
- Moderator
- Registered: 2019-05-11
- Posts: 318
Re: PM3 not detected after second use
The rdv4 is what I would call the latest. its about the size of a card (but thicker) in a black case. When on, has 4 blue leds (always on) and 4 red leds (on/off based on whats going on).
but if it only has the one usb port, then its not what I was thinking may have been a simple issue.
Search the web for images of the different models if not matching the rdv4 (4.01) description.
If there are ANY leds "on" when connected/powered, let us know which ones are on.
Offline
#13 2019-11-04 21:07:06
- XT4T1C
- Contributor
- Registered: 2019-10-12
- Posts: 19
Re: PM3 not detected after second use
OK never mind... I'm no paying attention at all obviously.. It's got two connectors indeed and I was using the wrong one all the time. I've got a rdv4 indeeed. Probleem solved! Sorry ':) and thanks!
Now what's this other connector for?
Offline
#14 2019-11-04 21:43:20
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: PM3 not detected after second use
two connectors? Then you don't have a RDV4... You have a bad chinese clone of the PM3 Easy.
Offline
#15 2019-11-04 23:50:04
- mwalker
- Moderator
- Registered: 2019-05-11
- Posts: 318
Re: PM3 not detected after second use
Not 100% sure what the 2nd is for, I think it was for power or an external antenna hookup, but as iceman said, sounds like a clone of the PM3 Easy.
either way, you got it working 
If all is well, can you edit the subject and mark as [SOLVED]
Thanks
Offline
Pages: 1