Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2020-01-01 08:39:09
- iNeedHelpX
- Contributor
- From: Toronto Canada
- Registered: 2019-12-28
- Posts: 13
sniffing communication with the reader
hello! I just got my proxmark all set up on iceman. 
my question is how does sniffing with the card reader work? Do I need to keep my card intact with the proxmark? I know that the communication is in plain text.
Last edited by iNeedHelpX (2020-01-01 08:41:04)
Offline
#2 2020-01-01 09:40:35
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: sniffing communication with the reader
Sniffing is a bit tricky.
Two working scenarios.
A) [reader] - [card] - [pm3]
B) [reader] - [pm3] - [card]I usually get best success to get all trafic (reader and card) when I use (B) but I always end up trying both.
The involved commands, I suggest reading the help text and start from there.
hf 14a sniff h
trace list h
trace save hOffline
Pages: 1