Proxmark3 community

ArrestedLawyer

Contributor

Registered: 2020-01-15

Posts: 1

Hej!

Hello everyone!

It's a pleasure to be here! I'm currently a student with a recent interest taken in RFID hacking. I've been poking around on the forum for a couple months now and recently purchased a Proxmark3 RDV4.0, iClass SE R90, some cards, and an omnikey 5321 (with grant money from the school). The goal for my capstone project is to raise awareness and educate users on the vulnerabilities associated with RFID. My next step is to obtain one of the following:

* 6110A (R30)
* 6111A (RW300)
* 6120A (R40)
* 6121A (RW400)
* 6130A (RK40)
* 6131A (RWK400)

and extract the HID transport key. I'm aware these are nearly extinct but are the models that possess the vulnerable PIC18F452 microcontroller with Rev A. To my knowledge, the transport key is not publicly available. I built the RFID Thief v2.0 by @scund00r and can successfully capture the Block 7 information of a card from a distance. I now need the transport key to encrypt the data using the Proxmark3 and then write using iClassified. Anyways, I'm happy to be here and look forward to plucking everyone's brain.

Cheers!

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: Hej!

Welcome and thank you for reading the introduction post http://www.proxmark.org/forum/viewtopic.php?id=1125.

Your access rights has been updated.