Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2020-01-16 21:53:03
- Iacchus
- Contributor
- Registered: 2020-01-16
- Posts: 3
New disciple to the PM3 cult
Hi all,
I have compiled the iceman fork firmware, now just waiting anxiously for my Proxmark3 to arrive. I am pretty new to the near-field world and am looking forward to experimenting with the technology that has become ubiquitous in our lives. First thing I will do with my PM3 will be to inspect and clone my HID 125 kHz work fob.
I have ordered a cheap Chinese PM3 easy clone, which for now should be good enough for my needs, but I may eventually upgrade to the new tech if it becomes necessary. The PM3 clone that I ordered claims to be a v3 with 512 kb memory and second USB port for portable power bank usage. Will let you know if I come across anything interesting.
Cheers,
Offline
#2 2020-01-16 22:05:08
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: New disciple to the PM3 cult
Welcome and thank you for reading the introduction post http://www.proxmark.org/forum/viewtopic.php?id=1125.
Your access rights has been updated.
Offline
Pages: 1
Topic closed