Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
We successfully changed the UID on the card purchased from rtxsecure.com
However, the original and magic card are still not identical.
See attached.
Does anyone know how to make these two cards identical? The IC reference given, pages, and AFI are not the same between the two cards. How to change these values so the two cards are identical?
See screenshot here: http://prntscr.com/r9c6b7
Offline
Hello, normally identical UID the card must accept the file of the card to clone. You must verify the number of blocks of the card to clone & your magic card, they must be identical.
Good evening.
Offline