Proxmark3 community

foryouever

Contributor

Registered: 2020-03-08

Posts: 8

[solved]some advice to RRG/IceMan-20200310

Hi iceman,
thanks for your efforts，the RRG/IceMan-20200310 has sovled staticnested bug,  the "keys/sec" and remaining time value is proper.
but there's another problem, the CPU usage is too high when I execute proxmark3, it's about 40% and one of the core is 100%, and the system fans always run. My System is Windows10 64bit, intel i5 1.6GHz, 8G RAM.
I think the reason maybe is: the shell command waiting loop needs some sleep, just like sleep(500), ms.

Hope it helpful & Best Regards.

Last edited by foryouever (2020-03-18 16:17:16)

iceman

Administrator

Registered: 2013-04-25

Posts: 9,537

Website

Re: [solved]some advice to RRG/IceMan-20200310

Do you have the same issue running the client direct (client/proxmark3) ?
or just when you are running the schell script (./pm3) ?

foryouever

Contributor

Registered: 2020-03-08

Posts: 8

Re: [solved]some advice to RRG/IceMan-20200310

I mean in the windows "cmd " mode, run "proxmark3 com*", not run script. Even pm3 is idle, not running any command, the CPU usage is high.
Usurally, an interactive program will enter a loop, to waiting for next command line. At the end of the loop, add a sleep statment，may solve the CPU usage problem.
I've solved programming problems like this before，but I don't know if it applies. Reference only^_^

Last edited by foryouever (2020-03-11 16:49:09)

iceman

Administrator

Registered: 2013-04-25

Posts: 9,537

Website

Re: [solved]some advice to RRG/IceMan-20200310

If you think you have a solution for your problem,  Feel free to contribute.

foryouever

Contributor

Registered: 2020-03-08

Posts: 8

Re: [solved]some advice to RRG/IceMan-20200310

If you think you have a solution for your problem,  Feel free to contribute.

The offical repo works, great!
thanks Iceman, best regards.

offical-64-20200316