Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2020-03-15 11:53:38
- Hala
- Contributor
- Registered: 2019-09-11
- Posts: 4
Measuring power consumption
Hello,
I'm working on a project using PM3, and I'm trying to measure the power consumption while running a specific command. How can I do that? I'm not sure if there's a command for this or I can get it from a specific report. Your help is much appreciated.
Thanks,
Hala
Offline
#2 2020-03-15 12:39:52
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: Measuring power consumption
Not really if I understand it correct.
Either the adc goes into the fpga code where it can be decoded to LF or HF signal demodulations which is what happens when you use a command normally. Or you can "passthrough" the adc via fpga without modifications to arm, where you can read out the adc levels.
If I am wrong, feel free to enlighten me.
Offline
Pages: 1