Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#51 2020-04-05 02:05:07
- mwalker
- Moderator
- Registered: 2019-05-11
- Posts: 318
Re: [Solved] Proxmark not reading accurate Keri Internal ID #'s
OK, i have updated to the latest and I can now see your issue.
No idea why, but can see it now.
Offline
#52 2020-04-05 02:12:10
- ilovepancakes
- Contributor
- Registered: 2020-02-03
- Posts: 23
Re: [Solved] Proxmark not reading accurate Keri Internal ID #'s
Yeah I'm running the latest build that got installed through brew on MacOS.
Offline
#53 2020-04-05 03:23:22
- mwalker
- Moderator
- Registered: 2019-05-11
- Posts: 318
Re: [Solved] Proxmark not reading accurate Keri Internal ID #'s
Think I found the bug. Its in the lf search. Hope to have this fixed shortly.
Offline
#54 2020-04-05 05:42:10
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: [Solved] Proxmark not reading accurate Keri Internal ID #'s
try pulling latest source and flash. mrwalker found a bug that I introduced, which messes with 'lf search'--
Offline
#55 2020-04-05 05:42:34
- mwalker
- Moderator
- Registered: 2019-05-11
- Posts: 318
Re: [Solved] Proxmark not reading accurate Keri Internal ID #'s
Try pulling the latest rrg and flash to the proxmark.
Offline
#56 2020-04-08 16:35:16
- ilovepancakes
- Contributor
- Registered: 2020-02-03
- Posts: 23
Re: [Solved] Proxmark not reading accurate Keri Internal ID #'s
Errors on reading are gone, only "issue" I see now is when writing keri cred with clone command, the write does happen but no pm3 prompt is returned after, it hangs and I have to Ctrl+C out of the program and launch it again. But the write definitely happens okay because lf searching that card returns the written values. See below of where it hangs after writing.
[usb] pm3 --> lf keri clone t m f 6 c 559233
[+] Scrambled MS : FC 6 - CN 559233 to RAW : E0000000C20EC008
[=] Preparing to clone KERI to T55x7 with Internal Id: c20ec008
[+] Blk | Data
[+] ----+------------
[+] 00 | 603E1040
[+] 01 | 00000006
[+] 02 | 10760047
Ctrl+COffline