Proxmark3 community

Misko2468

Contributor

Registered: 2020-04-19

Posts: 11

'No rule to make target clear'. Stop

I installed Proxspace on Windows as I have been working with the Windows to use the PM3 RDV4 install because on Kali when I run;

make clear && make all

It outputs *** No rule to make target 'clear'. Stop

https://hastebin.com/ibujeduket.makefile
https://hastebin.com/unojoriyeh.makefile
https://hastebin.com/aforiseben.makefile
https://hastebin.com/upubazibix.makefile

These are the 4 makefiles in my directory, from what I can see 'clear' only appears in the host file.

Did I install something wrong? I did use the video that is on the installation page: https://github.com/RfidResearchGroup/proxmark3/blob/master/doc/md/Installation_Instructions/Linux-Installation-Instructions.md

The only difference between the video it seems is that the actual written text doesn't say to do; make clear && make all, but I assume it's needed.

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: 'No rule to make target clear'. Stop

No,  that is most likely part of the remake we are doing right now.  We change the folder layouts,  it should be back to working order on most OS's now.  (Compiles on OSX/*nix/WSL)  MingW / Proxspace v3.3 seems to suffer still. 
If you had an old version of the repo,  try making a new clone.

Misko2468

Contributor

Registered: 2020-04-19

Posts: 11

Re: 'No rule to make target clear'. Stop

Haha ya, I pulled it and it worked! Thank God, when things go wrong & you can think of reasons that's fine, but when you can't it makes me go crazy!