Proxmark3 community

4ntcard

Contributor

Registered: 2020-05-24

Posts: 9

Dbglevel...... 1 ( Error)

someone knows how to solve this error? I have flashed the firmware several times and the result is the same.

Memory
[#]   BigBuf_size.............42244
[#]   Available memory........42188
[#] Tracing
[#]   tracing ................1
[#]   traceLen ...............0
[#]   dma8 memory.............-2111924
[#]   dma16 memory............-2111924
[#]   toSend memory...........-2111924
[#] Current FPGA image
[#]   mode.................... HF image built for 2s30vq100 on 2020-07-08 at 23: 8:19
[#] Flash memory
[#]   Baudrate................24 MHz
[#]   Init....................OK
[#]   Memory size.............2 mbits / 256 kb
[#]   Unique ID...............0xD5690C23DFA8292A
[#] Smart card module (ISO 7816)
[#]   version.................v3.10
[#] LF Sampling config
[#]   [q] divisor.............95 ( 125.00 kHz )
[#]   [b] bits per sample.....8
[#]   [d] decimation..........1
[#]   [a] averaging...........Yes
[#]   [t] trigger threshold...0
[#]   [s] samples to skip.....0 
[#] LF Sampling Stack
[#]   Max stack usage.........3952 / 8480 bytes
[#] LF T55XX config
[#]            [r]               [a]   [b]   [c]   [d]   [e]   [f]   [g]
[#]            mode            |start|write|write|write| read|write|write
[#]                            | gap | gap |  0  |  1  | gap |  2  |  3
[#] ---------------------------+-----+-----+-----+-----+-----+-----+------
[#] fixed bit length (default) |  29 |  17 |  15 |  47 |  15 | N/A | N/A | 
[#]     long leading reference |  29 |  17 |  13 |  47 |  47 | N/A | N/A | 
[#]               leading zero |  29 |  17 |  13 |  47 |  47 | N/A | N/A | 
[#]    1 of 4 coding reference |  29 |  17 |  13 |  47 |  47 |  29 |  29 | 

[#] Transfer Speed
[#]   Sending packets to client...
[#]   Time elapsed............500ms
[#]   Bytes transferred.......286720
[#]   Transfer Speed PM3 -> Client = 573440 bytes/s
[#] Various
[#]   Max stack usage.........4096 / 8480 bytes
[#]   DBGLEVEL................1 ( ERROR )
[#]   ToSendMax...............-1
[#]   ToSend BUFFERSIZE.......2308
[#]   Slow clock..............30600 Hz
[#] Installed StandAlone Mode
[#]   HF - Reading Visa cards & Emulating a Visa MSD Transaction(ISO14443) - (Salvador Mendoza)
[#] Flash memory dictionary loaded
[#]   Mifare..................920 keys
[#]   T55x7...................109 keys
[#]   iClass..................7 keys
 

mwalker

Moderator

Registered: 2019-05-11

Posts: 318

Re: Dbglevel...... 1 ( Error)

That is not an error, it is the device side debug level.  Report "errors"
The following command can set it (not sure if it saves it)

[usb] pm3 --> hw dbg
Usage:  hw dbg [h] <debug level>
Options:
           h    this help
       <debug level>  (Optional) see list for valid levels
           0 - no debug messages
           1 - error messages
           2 - plus information messages
           3 - plus debug messages
           4 - print even debug messages in timing critical functions
               Note: this option therefore may cause malfunction itself
Examples:
           hw dbg 3

4ntcard

Contributor

Registered: 2020-05-24

Posts: 9

Re: Dbglevel...... 1 ( Error)

Thank you very much!