Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2022-07-10 17:29:26

baremetal
Contributor
Registered: 2022-07-10
Posts: 2

resuming proxmark3 harwares

Hi,

Is it possible to have a synthesis of existing hardware of proxmark3 ?

This is what I have been able to understand:

- there is one open hardware board available in the github of the project
- the companie proxgrind have evelopt several hardware (not open as far as I know)
   - Rdv2
   - Evo
   - Chameleon Mini/Tiny
   - Rdv4
- and a lot of proxgrind’s copies available on aliexpress. Theses copies often have custom firmware witch are not always usable or reprogrammable.

I didn’t find any thread resuming this.

Can anybody correct and complete what I said? It would also be great to have a comparison of these hardware.
Even if somebody could bring some info about cheep copies and recommend some witch could work.

And it can be usefull for new people to have a clean sticky poste that resume this, it can even be a guide to know what to buy depending on our usage

thanks in advance

Offline

Board footer

Powered by FluxBB