Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hello does anyone already had this problem
i'm attempting to write to em4X50 tag yesterday was working perfectly and today i have the message writing failed
I dump the tag only 0 digit in the dump prompt but when i dump it with my icopy-x everything is ok and the writing with the rdv4 worked even he returned a failed writing message.
I'm runing on windows 11 but tried on kali and it's same issue
Thanks everyone for your answer
Last edited by Zbre@ker (2023-06-27 11:48:10)
Offline
hello, i am writing about this type of badge without particular worries, it is important that there is no passwd in your badge.lf em 4x50 info & you will be able to see it, otherwise i am only writing in --blk 5 & 9 . What's also interesting with this badge you take the dump of another badge that works elsewhere & do a restore works very well too.
Ah yes also check that your rdv4 antenna is on Q 14
Last edited by fazer (2023-06-27 17:06:39)
Offline
Thanks for your answer i'm writing with icopy-x and the client supplied for on Windows 11 and it works verry well
There is no password on my tag
I'm suspicious on my rdv4 hardware or software but why yesterday was working perfectly and today i've this problem ?
Offline
hi there the issue has gone nothing done just gone
Offline
Hi, although everything is back to normal, I'm working with an rdv4.0 & the latest Iceman update, which I thank by the way. I don't know icopy-x, my Os & linux & also on Windows 10 but I prefer linux. Install the latest version on your rdv4 if this has not done.
Good day.
Offline
Pages: 1