Proxmark3 community

TomNick100

Contributor

Registered: 2024-02-07

Posts: 4

Sim014.bin upgrade problem

Hi everybody,

I started my proxmark and got a device mismatch:

 /proxmark3$ ./pm3
[=] Session log /home/jesse/.proxmark3/logs/log_20240214120236.txt
[+] loaded `/home/jesse/.proxmark3/preferences.json`
[+] Using UART port /dev/ttyACM0
[+] Communicating with PM3 over USB-CDC


  8888888b.  888b     d888  .d8888b.   
  888   Y88b 8888b   d8888 d88P  Y88b  
  888    888 88888b.d88888      .d88P  
  888   d88P 888Y88888P888     8888"  
  8888888P"  888 Y888P 888      "Y8b.  
  888        888  Y8P  888 888    888  
  888        888   "   888 Y88b  d88P 
  888        888       888  "Y8888P"    [ ☕ ]


QSocketNotifier: Can only be used with threads started with QThread
  [ Proxmark3 RFID instrument ]

    MCU....... AT91SAM7S512 Rev A
    Memory.... 512 KB ( 69% used )

    Client.... Iceman/master/v4.17768-380-g6566021f3 2024-02-07 08:38:29
    Bootrom... Iceman/master/v4.17768-380-g6566021f3-suspect 2024-02-07 08:38:20 
    OS........ Iceman/master/v4.17768-380-g6566021f3-suspect 2024-02-07 08:38:38 
    Target.... device / fw mismatch

So I tried to upgrade the sim014.bin:

[usb] pm3 --> smart upgrade -f /usr/local/share/proxmark3/firmware/sim014.bin
[=] --------------------------------------------------------------------
[!] ⚠️  WARNING - sim module firmware upgrade
[!] ⚠️  A dangerous command, do wrong and you could brick the sim module
[=] --------------------------------------------------------------------

[=] firmware file       /usr/local/share/proxmark3/firmware/sim014.bin
[=] Checking integrity  /usr/local/share/proxmark3/firmware/sim014.sha512.txt
[+] loaded 3658 bytes from binary file `/usr/local/share/proxmark3/firmware/sim014.bin`
[+] loaded 158 bytes from binary file `/usr/local/share/proxmark3/firmware/sim014.sha512.txt`
[=] Don't turn off your PM3!
[+] Sim module firmware uploading to PM3...
 ? 3658 bytes sent
[+] Sim module firmware updating...
[#] FW 0000
[#] Writing failed
[-] ⛔ Sim module firmware upgrade failed
[usb] pm3 --> 

I am stuck right now. Anybody any idea how to solve the writing or and the mismatch problem? Thanks for some hints...

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: Sim014.bin upgrade problem

.... do you have a Proxmark3 RDV4?

TomNick100

Contributor

Registered: 2024-02-07

Posts: 4

Re: Sim014.bin upgrade problem

.... do you have a Proxmark3 RDV4?

No, Easy

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: Sim014.bin upgrade problem

Does your Easy have extra external flash memory?    And you need to flash / run a client targeted to your specific device.