Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2012-05-25 12:41:53
- Viracocha
- Member
- Registered: 2010-03-08
- Posts: 2
No version info
Hi
I recently updated my proxmark firmware with version 537 (18th may) but when i check it with 'hw version' i get...
#db# bootrom: Version information not available
#db# os: Version information not available
#db# FPGA image built on 2009/12/ 8 at 8: 3:54
After a bit of reading it seems the fpga date doesn't get updated so i'm not concerned about that but the other two should be. The proxmark still works fine so it seems those values are the only things wrong, it's not vital but i would like it working perfectly if possible 
I'm on Windows XP and the files were built within the supplied cli started from runme.bat, i was thinking it might be an issue with the date not being updated in the code on compile? If that could be the case i'll check out the code and see if i can track down the issue (makefile bug?)
Thanks
Offline
Pages: 1