Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2012-09-03 20:39:51
- timififilger
- Contributor
- Registered: 2012-08-28
- Posts: 17
Bootrom : Version information not available / os /fpga
Hello there,
I got a Pm today and I don't understand how to flash it.
I 'm a beginner so please be gentle.
1) i installed PM driver following the PM3 starter guide.
2) I chose a c:Promark proxspace file to run the runme.bat command.
I edited it changing it like this
set MYPATH=C:\ProxMark\ProxSpace
echo #Win32_Path Mount_Point >msys/etc/fstab
echo %MYPATH%\mingw /mingw >>msys/etc/fstab
echo %MYPATH%\devkitARM /devkitARM >>msys/etc/fstab
echo %MYPATH%\Qt\4.6.2 /qt >>msys/etc/fstab
echo %MYPATH%\pm3 /home/pm3 >>msys/etc/fstab
msys\msys.bat
when i try to run make clean && make all, i have errors with th terminal.
however, i can communicate with the terminal hw version gives me:
bootrom: version information not available
os : version information not available
FPGA image built on 2009/12/8 at 8 3:54
Any ideas how to procede?
Can you explain me what to do, with beginner's words?
Best regards from france
Offline
#2 2012-09-03 21:07:25
- timififilger
- Contributor
- Registered: 2012-08-28
- Posts: 17
Re: Bootrom : Version information not available / os /fpga
When i try the command : ./client.flasher.exe -b bootrom.elf,
I have Waiting for Promark to appear on Usb... Found, and
the program crashes...
I'm frustrated not to use my PM! 
Offline
#3 2012-09-03 21:54:43
- timififilger
- Contributor
- Registered: 2012-08-28
- Posts: 17
Re: Bootrom : Version information not available / os /fpga
Outch! I couldn't imagin it was so hard to flash this little card.
After 6 hours, i still completely don't understand how to make it work. I'm surfing on differents threads but the problems appear to be everywhere...
Any help would be really welcome...
Thanks
Offline
#4 2012-09-03 22:25:04
- timififilger
- Contributor
- Registered: 2012-08-28
- Posts: 17
Re: Bootrom : Version information not available / os /fpga
One more thing : How to copy/ paste in runme.bat?
It would be usful to write myerror codes 
Offline
#5 2012-09-04 20:47:13
- timififilger
- Contributor
- Registered: 2012-08-28
- Posts: 17
Re: Bootrom : Version information not available / os /fpga
Answering to myself, i finally use my proxmark with help of my proxmark's seller.
He directly sent to me software, but using the "hw version" command, i can't see my proxmark's version, but i still can read lf and hf tags.
I don't understand how can it be possible but i'ts working.
however i don't get the good id lf tags using the http://code.google.com/p/proxmark3/wiki/TagOps method.
still in progress.
Offline